How To Clean O Cedar Mop Heads (Easy Guide)
If your O-Cedar mop head is looking a little rough, it’s probably time for a good clean. A dirty mop just spreads grime around instead of actually cleaning your floors.
The good news? Washing it is super easy and doesn’t take much time.
In this guide, I’ll show you how to clean O Cedar mop heads step by step.
For Machine-Washable Mop Heads
If you’ve got a mop head that’s safe for machine washing, like the EasyWring microfiber one, cleaning is a breeze. Here’s how to do it step by step:
#1 Remove The Mop Head
First thing’s first: take that mop head off! It’s as easy as twisting or pulling it off the mop handle.
You might have to give it a little tug depending on how tight it’s on, but it should come off without any issues.
Don’t rush this step, though. You don’t want to damage the connection point by pulling too hard.
Once it's off, you're all set to start cleaning it properly.
Also Read: How to use Swiffer on hardwood floors
#2 Shake Off Loose Debris
Now, give that mop head a good shake to get rid of any big chunks of dirt, dust, or hair.
This is important because it helps get rid of debris before you throw it into the washing machine.
If you’ve been cleaning a lot, this step can help loosen anything that might be stuck in the fibers, like pet hair or little crumbs.
Try to shake it out over a trash bin or outside to avoid making a mess in your home.
#3 Machine Wash
Next up, toss it into the washing machine. Simple as that. I’d recommend washing it on a gentle cycle with warm water.
A regular laundry detergent should work fine, but avoid using fabric softener. Fabric softeners can make the fibers less absorbent, which is a no-go for a mop.
If the mop head has a particularly strong smell (maybe you’ve been using it to clean up something sticky), you can add a little baking soda or white vinegar to the wash for extra freshness.
Just make sure not to overload the washer—your mop needs space to move around.
Also Check Out Our: Deep cleaning Services
#4 Air Dry The O Cedar Mop Head
Once the cycle is done, don’t toss your mop head into the dryer. Air-drying is the best option for keeping your mop head in tip-top shape.
Lay it flat on a drying rack or hang it somewhere out of the sun.
The fibers will dry out slowly, which will help preserve the shape and integrity of the material. If you put it in the dryer, you risk shrinking or damaging the fibers, so give it the time it needs to dry naturally.
Depending on the humidity and airflow, this could take a few hours or overnight.
For Non-Machine-Washable O Cedar Mop Heads
Not every O Cedar mop head is machine-washable. But don’t worry, cleaning those isn’t much harder either. You just need a little extra elbow grease and a few extra steps.
Here’s how to clean your non-machine-washable mop head:
#1 Remove The Mop Head
Just like with the machine-washable mop, the first step is to take the mop head off.
This might take a little twist or pull depending on your mop model, but it should come off pretty easily. Be careful not to force it too much, though, as that could damage the attachment or the mop head itself.
Once the head is detached, you’re ready to get started with the cleaning process.
#2 Soak In A Cleaning Solution
Next, grab a large bowl, bucket, or your bathtub and fill it with warm water.
Add a small amount of your favorite cleaning solution or mix in some white vinegar and water.
If you’re using vinegar, it works great to break down any stubborn grime or even disinfect. Let the mop head sit in the solution for about 10 to 15 minutes.
This gives the cleaning solution time to loosen up all the dirt, dust, and grime that's stuck deep in the fibers. You’ll be surprised how much cleaner it gets just by soaking!
Also Read: How To Clean Boogers Off Walls
#3 Swish And Scrub
After soaking, it’s time to put in a little elbow grease.
Use a soft brush (like a toothbrush) or just your hands to scrub the mop head. Gently swish the mop around in the water to help loosen any extra dirt or residue.
If you see any stubborn spots, you can use the brush to scrub them away. Make sure to focus on the areas where dirt tends to collect, like around the edges or in between fibers.
Don’t scrub too hard—be gentle to avoid damaging the mop’s fabric.
#4 Rinse Thoroughly
Once you’re happy with how clean your mop head is, it’s time to rinse it.
Hold the mop under running warm water to wash out any soap or cleaning solution. Make sure to rinse it thoroughly to remove all traces of detergent or vinegar.
If there’s any soap left behind, it can lead to a sticky residue the next time you use the mop.
Take your time with this step, and keep rinsing until the water runs clear.
#5 Air Dry Completely
Just like with the machine-washable mop head, air-drying is the way to go for non machine washable mop heads.
Lay it flat on a towel or hang it somewhere to dry naturally. It’s important to let it dry completely before using it again. If you leave it damp, you risk the growth of bacteria or mold.
It might take a few hours to dry fully, but that’s a small price to pay for a clean mop head that will last.
Bottom Line
Keeping your O-Cedar mop head clean isn’t just about appearances—it helps your mop do its job better and keeps your floors really clean.
A little regular maintenance goes a long way in preventing odors, bacteria buildup, and grime from spreading around your home. So take a few minutes to wash it, let it dry properly, and you’ll get more life out of your mop while keeping your floors spotless.