We’ve all been there – your cat decides the concrete floor is a good place to mark its territory. And now, you’ve got a mess to clean up.

Concrete can be tricky to deal with, especially when you're trying to get rid of both the stain and the smell. But don’t worry—it’s easier than you might think!

In this quick guide, I’ll show you how to clean cat pee on concrete, and leave it fresh and odor-free.

#1 Find The Affected Area

First things first, you need to figure out where the cat pee is.

This can sometimes be tricky, especially if the smell is lingering but you can’t see any visible stains.

If you’re not sure, a blacklight flashlight works wonders. The urine will glow under the UV light, and bam, you’ll have your target area.

Once you’ve located the spot, don’t rush into cleaning it up just yet. You want to be sure you have everything in place first.

#2 Prepare A Cleaning Solution

Now that you know where the mess is, it’s time to mix up a cleaning solution. You’ve got a couple of options here: TSP or an enzymatic cleaner. Let’s take a look at both.

Option 1: Trisodium Phosphate (TSP) Solution

TSP is a super effective cleaner for stubborn stains like cat pee. It’s a strong cleaner that works wonders on concrete surfaces.

To make your TSP solution, grab about 1/4 cup of TSP and mix it with a gallon of warm water. Make sure you’re wearing gloves when handling this stuff, as it can be a bit harsh on your skin.

Once mixed, soak the affected area with the solution. Let it sit for a few minutes to break down the stain before scrubbing.

This will help get rid of the urine and its smell from the porous concrete.

Option 2: Enzymatic Cleaner

Enzymatic cleaners are another great option. These are the go-to for getting rid of the smell because they break down the proteins in urine.

So if the cat pee smell is the worst part of the problem, this could be your best bet.

You can find enzymatic cleaners at most pet stores or online.

They’re typically a spray, so it’s pretty easy to apply. Just spray it generously over the area and let it sit. Follow the instructions on the label for the best results.

Most of the time, you’ll want to let it sit for a while, sometimes up to 15 minutes or so.

Also Read: Can You Put Cleaner In A Steam Mop?

#3 Clean The Stained Area

Here’s where the elbow grease comes in - it’s time to scrub.

If you're using TSP, you can use a stiff-bristled brush. Get in there and work the solution into the concrete. If you’re using an enzymatic cleaner, a soft sponge or cloth should do the job.

You want to scrub well but be gentle on the concrete. Focus on the area where the urine has soaked in. Concrete is porous, so the urine can seep deep into it.

This step is crucial to make sure you’re breaking up all those stubborn stains and smells.

Once you’ve scrubbed the area clean, it’s time to rinse.

#4 Rinse And Extract

After you’ve cleaned the stain, you’ve got to rinse the area to remove any leftover cleaning solution or urine.

Grab a bucket of clean water and pour it over the affected area, making sure you get rid of all the cleaning solution residue.

Now, you could just let the concrete air dry, but the best option is to extract as much water as possible. You can use a wet vacuum or even a towel to soak up the excess water. The more you get up, the quicker it will dry, and the less likely you are to have any lingering smells.

If you don’t have a wet vacuum, no problem. Just use a couple of towels to blot the area dry.

The important thing is to remove the moisture so the concrete can dry out completely.

How to get rid of cat pee smell on concrete

Also Read: How To Get Rid Of Pine Sol Smell

#5 Use Vinegar And Baking Soda For Smells

If the smell is still hanging around after cleaning, don’t worry – you’ve got a simple solution in your kitchen. Vinegar and baking soda can work wonders on odors.

You can’t go wrong with this stuff; it helps neutralize odors naturally!

Start by sprinkling a generous amount of baking soda over the affected area.

Then, pour some white vinegar over the baking soda. You’ll hear a fizzing sound, which is just the vinegar working its magic. Let it sit for a few minutes, and then scrub it gently with a brush.

Once you’ve given it a scrub, rinse the area again with clean water to get rid of the vinegar and baking soda mixture. And remember to extract the water just like you did earlier.

This combo is a great odor-remover, so if there’s still a trace of that unmistakable cat pee smell, this should do the trick.

#6 Seal The Concrete (Optional)

Okay, this last step isn’t necessary, but it’s a good idea if you want to protect your concrete from future accidents.

Sealing your concrete creates a protective barrier that can help prevent stains from soaking in.

If you’ve cleaned the area thoroughly and want to make sure your concrete stays fresh, apply a concrete sealer.

This isn’t something you need to do immediately, though. If your cat has a habit of peeing in the same spot, you might want to consider sealing the entire floor to make future clean-ups easier.

To seal the concrete, follow the manufacturer’s instructions on the sealer’s label. Typically, you’ll apply the sealer with a roller or brush and let it dry for the recommended time.

Bottom Line

Cleaning cat pee on concrete doesn’t have to be a nightmare. It’s all about acting quickly and using the right cleaning solutions.

Whether you go for a TSP solution or an enzymatic cleaner, make sure to scrub well, rinse thoroughly, and tackle any lingering odors with vinegar and baking soda.

Sealing the concrete can be a nice touch to keep things fresh for the future.

Don’t stress if the smell doesn’t go away right away – just take your time with the steps and be patient.

You’ll have that concrete floor looking and smelling good as new in no time!

How To Clean Cat Pee On Concrete (Quick Guide)