Bar Keepers Friend On Quartz (Cleaning Guide)
Ever wondered if you can use Bar Keepers Friend on your quartz countertops?
You’re not alone. If you’ve got stubborn stains or grime that just won’t budge, it’s natural to reach for the heavy hitters like BKF.
I have good news for you - it's OK to use Bar Keepers Friend on quartz! But you shouldn't use the original product, there's a version that's meant for natural stones.
In this quick guide, I’ll show you how to use Bar Keepers Friend on quartz.
Can You Use Bar Keepers Friend On Quartz?
Yes, you can use Bar Keepers Friend on quartz. But can’t use the original Bar Keepers Friend powder or the Soft Cleanser. It contains abrasives that can scratch or damage the resin in your quartz which could make it look dull and tired.
You have to use the Bar Keepers Friend Granite & Stone Cleaner & Polish.
It’s pH-balanced, non-abrasive, and gentle enough for cleaning stones like quartz.
The best part? It’ll leave your quartz shining without any harm.
How To Use Bar Keepers Friend On Quartz
Cleaning your quartz countertops with Bar Keepers Friend is a breeze, but there are a few steps that’ll make the process even easier.
Here’s how to use Bar Keepers Friend on quartz:
#1 Shake The Bottle
Before you start spraying, make sure you give the bottle a good shake!
This may seem like a small thing, but it’s actually super important. Sometimes, the ingredients in cleaning products can separate a little bit over time, so shaking the bottle ensures everything is mixed up properly.
You don’t want to end up with a watery mess or a spotty clean, right?
A couple of solid shakes should do it—nothing too crazy, just enough to mix it all together.
It’s a simple step, but it sets you up for a much better clean!
Also Read: Bar Keepers Friend Alternatives
#2 Spray Onto The Quartz Surface
Now it’s time to apply the cleaner. Hold the bottle about 6-8 inches away from your quartz surface and give it a few light sprays.
You don’t need to soak the whole countertop. A little goes a long way, and too much product can leave streaks or make the cleaning process feel unnecessarily messy.
Aim for a nice, even coat. You’ll want to cover the surface enough to loosen up any dirt or sticky spots, but don’t drown it in cleaner.
A quick, controlled spray will be more than enough to get the job done!
#3 Wipe With A Soft Cloth
Once you’ve sprayed the cleaner, it’s time to grab your cloth. Always use a microfiber cloth or a soft paper towel to wipe down the surface.
Why microfiber? It’s super gentle, so it won’t scratch your quartz, but it’s also highly effective at picking up dirt, oils, and spills.
You’ll want to wipe in circular motions, which helps to evenly distribute the cleaner and prevent streaks. This way, you’re not just pushing dirt around but actually lifting it off the surface. And the circular motion also keeps your quartz looking polished, not streaky.
So, take your time here and make sure you cover the entire surface with a nice, smooth pass.
Also Read: Vinegar Smell In House
#4 Dealing With Stubborn Spots
Now there are always those stubborn spots that just don’t want to budge.
For tough spots, just let the BKF sit on the stain for about one minute. BFK needs a little time to work its magic and break down whatever grime is stuck on the surface.
After you let it sit, gently scrub the spot with a non-abrasive sponge.
Make sure to use a soft sponge, not a rough one that could scratch your quartz.
Be gentle but firm enough to get the spot cleaned up. You’ll notice that after a quick scrub, that stubborn mark will disappear without any trouble!
#5 Dry It Off
The final step is one of the most important, even though it’s the simplest: drying off the surface.
After you’ve wiped away the cleaner, grab a clean, dry cloth to give your quartz a final wipe.
This is important because it helps remove any leftover cleaner that could cause streaking. Plus, drying it off gives your quartz that shiny, polished look that you love so much.
This also helps prevent any water spots or residue from sitting on the surface, which keeps your countertop looking pristine.
So don’t skip this part!
Also Read: What Should You NOT Use CLR On
Tips For Using Bar Keepers Friend On Quartz
Here are a few extra tips to make your quartz cleaning experience even better:
Always do a spot test in an inconspicuous area before cleaning the entire surface.
Use a soft cloth or sponge to avoid scratching the quartz.
Don’t use too much pressure—let the cleaner do the work for you.
Rinse the surface thoroughly after cleaning to remove any residue.
Avoid using Bar Keepers Friend on polished or sealed edges, as they can be more delicate.
Bottom Line
Bar Keepers Friend can be used on quartz, but only if you’re using the right product—the Granite & Stone Cleaner & Polish. It’s safe, effective, and easy to use, and it’ll help you keep your quartz countertops looking shiny and clean without risking damage.
So, next time you spill something or notice a bit of grime building up, just grab that bottle, shake it up, spray it on, wipe it down, and dry it off. It’s that simple!
Plus, with a little regular cleaning, your quartz will stay looking as good as new.