Mold On Mirror? (Your Cleaning Guide)
Mold on mirrors? Yep, it happens—especially in bathrooms or places with high humidity. But don’t worry! You don’t have to throw out your mirror or live with it
You can get rid of mold pretty easily and keep it from coming back with regular cleaning.
In this quick guide, I’ll show you how to clean mold on mirrors step by step.
How To Remove Mold On Mirrors
Here’s a step by step guide on how to get rid of mold from mirrors:
#1 Gather Your Cleaning Supplies
Before you start cleaning, make sure you have everything you need:
Distilled White Vinegar (Or Hydrogen Peroxide As An Alternative)
Baking Soda (Optional)
Spray Bottle
Microfiber Cloth Or Soft Sponge
Old Toothbrush (Optional, For Hard-To-Reach Spots)
Gloves (For Protection)
Bucket Of Warm Water (For Cleaning)
Rubbing Alcohol (Optional For Disinfecting)
Also Read: Can You Use A Magic Eraser On Glass Mirrors?
#2 Safety Precautions
First, I want to talk a bit about staying safe while cleaning mold.
Always put on rubber gloves - they protect your hands from both the mold and cleaning products. Even natural cleaners like vinegar can make your skin feel uncomfortable.
Make sure you get plenty of fresh air flowing through the room by opening windows, and maybe set up a fan. If you're working in a small bathroom, keep the door open and turn on the exhaust fan.
This keeps you safe from cleaning fumes and stops mold spores from spreading around while you clean.
#3 Prepare The Cleaning Solution
Now let's pick your cleaning solution based on how bad the mold problem is.
The easiest option is to fill your spray bottle with straight white vinegar - it naturally kills mold. If that seems too strong, mix it with an equal amount of water.
Hydrogen peroxide works great too, especially if you don't like how vinegar smells. But make sure it's 3% strength and pour it into a dark-colored spray bottle since light breaks it down.
For really stubborn mold, mix some baking soda with just enough water to make a paste.
This gives you something mildly abrasive that won't damage your mirror or frame.
Keep in mind that mixing different cleaners isn't a good idea - stick to one type at a time.
#4 Apply The Cleaner
Hold your spray bottle about 6-8 inches away from the mirror and give those moldy areas a good spray. You want to really cover the frame, corners, and any spots where you see mold.
Just be careful not to go overboard with the spraying.
If it starts running down the mirror, you've used too much, and that could cause problems by seeping behind the glass or messing up the backing.
Once everything's covered, set a timer for 15 minutes.
This waiting time really matters - it gives your cleaner a chance to break down the mold structure and makes the next steps much easier.
If you're using the baking soda paste, apply it now with a small brush or your gloved finger, focusing on the worst spots.
Also Read: What To Put In Toilet Tank To Smell Good
#5 Scrub Away The Mold
Time to get rid of the mold. Grab your microfiber cloth or soft sponge and start with the least moldy areas first. Work in sections, using gentle circular motions.
Don't rush this part - each section needs attention to make sure you're getting all the mold.
When you hit a tough spot, that's when to use that old toothbrush. Use the bristles to get into every little groove and corner, especially around the frame.
If you notice the cloth or sponge getting dirty, switch to a clean one - you don't want to spread the mold around.
#6 Rinse And Wipe
Rinsing needs to be thorough to get rid of all the cleaning products.
Get a clean microfiber cloth wet with warm water and squeeze it out well - you want it damp but not dripping everywhere.
Wipe down everything you cleaned, rinsing and squeezing out your cloth often so you're not just moving dirty water around. Pay extra attention to areas where you used baking soda paste - you don't want it leaving a white film behind.
You might need to go over everything a few times with a clean, damp cloth to get all the cleaning solution and mold off.
#7 Dry The Area
Getting everything completely dry is super important to keep mold from coming back.
Take a fresh, clean microfiber cloth and dry everything thoroughly. Pay special attention to corners, edges, and any decorative parts where water might collect.
You might need several clean cloths to get everything properly dry.
Keep the bathroom fan running or set up a regular fan to keep air moving around - this helps get rid of any moisture that's left behind.
Also Read: Windex Alternatives To Clean Glass
#8 Disinfect (Optional)
Want to be extra sure the mold won't come back? Try this extra disinfecting step, especially if your bathroom tends to get humid.
Put some rubbing alcohol on a clean cloth - don't spray it, because it can drip and run. Wipe down everything you just cleaned, especially the corners and crevices.
Rubbing alcohol is great because it kills any remaining mold spores and dries really quickly.
Bottom Line
Mold on mirrors is annoying but super easy to remove.
With the right cleaning products (like vinegar or hydrogen peroxide) and a bit of scrubbing, you can get rid of it and keep it from coming back.
Just remember to keep things dry and well-ventilated to prevent future mold issues!
You might also want to consider putting some mold-resistant sealant around your mirror frame, and check regularly for water damage or caulk that's coming loose.
The best way to prevent mold is to control humidity - getting a dehumidifier can really help in naturally damp spaces.
FAQs
Black Mold On Mirror?
Black mold on a mirror itself isn’t as dangerous as on porous surfaces like drywall, but it can still be a health concern.
If you notice black mold, it’s best to clean it off quickly to avoid potential respiratory issues.
Can Mold Grow On Mirrors?
Mold doesn’t grow on the glass part of the mirror, but it can definitely grow on the surrounding areas, like the frame or the wall behind it, if there's moisture.
So, if you see mold around your mirror, it’s usually in the spots where moisture hangs out!